The New York State Education Department (“SED”) Office of the Professions (“OP”) is alerting everyone to a vishing scam that has been brought to our attention. Phishing—or “vishing”—scams impersonate SED employees or websites attempting to collect licensure and personal information from the licensee. If you receive an inquiry which you believe to be suspicious do not provide any information. To verify if the inquiry was from OP, contact OP directly using the following contact information. You may report suspicious calls or emails to the Federal Trade Commission.
  • NYSED Homepage
  • Disclaimer
  • Contact Us
  • NYSED Employment
  • Board Members Only

Application Forms for Professional Engineering

Important Notice: DO NOT use Form 1 if you are already licensed in this profession in New York State. A New York State professional license is valid for life unless it is revoked, annulled, or suspended by the Board of Regents. To practice in New York State, your professional license must be registered. To renew your registration online, visit http://op.nysed.gov/services/online-registration-renewal. If your registration has lapsed for longer than 4 months, submit a Delayed Registration Application.

You may print and keep this checklist as a reminder of what forms you have filed and when you filed them. This is for your reference and should not be submitted with your application forms. You should also keep a copy of all application forms submitted.

Visit Form

All applicants for licensure must initially submit Form 1 along with the appropriate licensure and first registration fee. You must answer all questions and provide all information requested unless otherwise indicated. Failure to accurately complete all required parts of the application will delay its review. Additional forms below are required based on the licensure requirements of the profession. Do not use Form 1 to renew your existing license.

Continuing Your Application
If you have started an application within the past 30 days, and have not yet completed it, you can use this link to continue your application. You will need your Application ID, Social Security Number, and Date of Birth.

Upload Additional Documentation
If you have already completed an application, but you have additional documents or files to include in your previous submission, use this link to upload additional documentation. You will need your Application ID and Date of Birth.

Change Address or Name  - You are required to notify us within 30 days of any address or name changes. Please read the instructions to request this change.

Visit Form

Use this form to apply for a New York State Engineer in Training Certificate. Qualifications for New York State Engineer in Training Certificate may be found on our web site under License Requirements.

Applicants must complete this form and submit it with the appropriate fee ($70 only). Make checks payable to the New York State Education Department. NOTE: Your cancelled check is your receipt.

Continuing Your Application
If you have started an application within the past 30 days, and have not yet completed it, you can use this link to continue your application. You will need your Application ID, Social Security Number, and Date of Birth.

Upload Additional Documentation
If you have already completed an application, but you have additional documents or files to include in your previous submission, use this link to upload additional documentation. You will need your Application ID and Date of Birth.

Change Address or Name You are required to notify us within 30 days of any address or name changes. Please read the instructions to request this change.

Visit Form

This form must be submitted directly by the educational institution. The Office of the Professions will not accept this form if submitted by the applicant.

  • Section I: Complete this section and be sure to sign and date item 9.
  • Section II: Send this to the educational institution(s) you attended and ask that they return it directly to the Office of the Professions.

Please note: If you attended or graduated from a program that is NOT ABET-accredited and/or if you attended a graduate program, ask your school to attach an official transcript or marksheet.

Electronic Education Documentation

The Office of the Professions (OP) will accept official electronic transcripts and forms from educational institutions (i.e. colleges/universities) or designated third-party* transcript entities located in the United States, Canada, and the Philippines provided that:

  • The transcript is the certified true and official academic record and the document does NOT have an expiration date**.
  • OP can independently verify that the documentation is received directly from the educational institution’s registrar or officially designated third-party.
  • If a third-party transcript provider is involved, it is clear that the educational institution has designated the third party as the official sole provider of its transcripts.
  • The applicant had no opportunity to directly access or alter the transcript before it is sent or transmitted.
  • Any educational institution education documentation submissions should be made electronically to DPLSEduc@nysed.gov***.

*OP will only accept third-party submissions after we have determined that the arrangement between the educational institution and the third party is consistent with our security and verification standards.

**Transcript documents with expiration dates cannot be accepted. Expirations on links to the document are acceptable.

***Do NOT use this email to submit a question, as we will be unable to provide a response. Submit a Contact Us Form for questions regarding specific applications or to check the status of a licensure application.

Visit Form

This form must be submitted directly by the licensing authority.

Use this form to

  • verify that you passed the Fundamentals of Engineering (FE) examination prior to October 2010. For FE examinations taken October 2010 and after, your examination results will automatically be verified through the NCEES system by the New York State Education Department.
  • verify that you passed the Principles and Practice of Engineering (PE) examination in another jurisdiction.
  • verify licensure and current registration in another jurisdiction.
  • Section I: Complete this section and be sure to sign and date item 8.
  • Section II: Send this to the jurisdiction(s) in which you are licensed or wish to have examination grades transferred from and ask that they complete this section and return the form directly to the Office of the Professions.

Note: A Form 3 is not required for licenses/certificates issued by the New York State Education Department. Also, If the certification/verification documentation provided by a U.S. jurisdictions contains the same information requested on the Form 3, completion of a Form 3 for that jurisdiction is not necessary. If the certification/verification documentation does not contain the same information as the Form 3, a Form 3 will need to be completed for that jurisdiction.

If you are applying for New York State Licensure using the NCEES record, this form is not required.

Electronic Verification of Licensure, Certification and/or Examination

The Office of the Professions (OP) will accept electronic verifications of licensure, certification and examination completion from other licensing authorities located in the United States provided that:

  • OP can independently authenticate that the verification is received directly from the licensing authority.
  • The applicant had no opportunity to directly access or alter the verification before it is sent or transmitted.
  • Any licensing authority verification submissions should be made electronically to DPLSVerif@nysed.gov.*

*DO NOT use this email to submit a question, as we will be unable to provide a response. Submit a Contact Us Form for questions regarding specific applications or to check the status of a licensure application.

 

Visit Form

The Department will not accept professional experience endorsed by the applicant.

Instructions For Completing Report of Professional Experience and Verification of Professional Experience 4 and 4A | PDF. See these instructions for additional information to document your engineering experience.

 

 

Visit Form
The Department will not accept professional experience endorsed by the applicant.
Instructions For Completing Report of Professional Experience and Verification of Professional Experience 4 and 4A | PDF ( 19 KB). See these instructions for additional information to document your engineering experience.

Please note: Section II of Form 4A must be typed or printed legibly, if typed, be sure to use a font size of 10 or greater as smaller fonts create difficulty for reviewers and will slow the review of your application. Also, a completed Form 4A must be submitted directly to the Office of the Professions by the endorser in an envelope bearing the endorser’s return address or company address. This form will not be accepted if submitted by the applicant.
 

Electronic Verification of Experience

The Office of the Professions (OP) will accept experience forms directly from supervisors provided that:

  • OP can independently verify that the documentation is received directly from the supervisor
  • The applicant had no opportunity to directly alter the experience form before it is sent or transmitted.
  • Any experience documentation submissions should be made electronically to DPLSExperience@nysed.gov*.

*Do NOT use this email to submit a question, as we will be unable to provide a response. Submit a Contact Us Form for questions regarding specific applications or to check the status of a licensure application.

Visit Form

Endorsement Applicants only

Use this form only if you wish to engage in interim practice while your application for licensure is being reviewed and you:

  • are not a resident of New York State, or
  • have no established place of practice in this State, or
  • are a resident of this State, but have arrived only within the past six months

You must have filed an application for licensure as a professional engineer in New York and must be legally qualified to practice in the state or country in which you currently reside or have a place of practice, or in your previous residence or place of practice. Interim practice will only be approved for a limited time to allow the Department time to review your application for licensure. If you are approved to practice for an interim period, you will not be allowed to claim or in any way state that you are providing services as a professional engineer licensed in New York State.

Visit Form
New York State Institutions/Schools
This form is for use by New York State Institutions/Schools only. Not to be used by individuals. This form must be submitted directly by the educational institution. The Office of Professions will not accept this form if submitted by the applicant.

This form is for use by New York State Institutions/Schools only. Not to be used by individuals. This form must be submitted directly by the educational institution. The Office of Professions will not accept this form if submitted by the applicant.

For use by New York State Institutions with EAC/ABET accredited programs in engineering only. This form may be used by schools in lieu of individual Form 2s for students who have graduated from an EAC/ABET baccalaureate program in engineering that qualifies them, after successful completion of the Fundamentals of Engineering (FE) examination, for a Certificate as an "Intern Engineer".

Visit Form